These Aquatec booster pumps provide “town pressure” for remote home water supplies where 12-volt or 24-volt power is available. They have a longer life and greater flow rate than other diaphragm booster pumps and they use less than half the energy consumed by an AC jet pump running on an inverter. The 120-volt version can be used on remote power systems with inverters.

Aquatec’s 550 pressure pumps delivers powerful flow rates at pressures up to 60 PSI. Their patented 5-chamber diaphragm and piston design allows these pumps to operate at very low noise levels and with minimal pulsations. These pumps are designed for intermittent duty, though most models can be run continuously for hours at a time. They are commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required.

The built-in pressure switch is set for 60 psi off and 40 psi on. The pumps come with straight threaded male half-inch fittings that snap into the quick disconnect ports. The optional strainer is highly recommended to keep debris out of the pump, insuring long diaphragm life.

All Aquatec 550 Pressure Pumps weigh 8 pounds each.

The SunPumps SJT series pump was designed for use in shallow water wells. It has excellent suction lift capabilities and is primarily used to fill open storage tanks. It operates directly on 250-550 watts of solar modules at 60-90 VDC. Use with SunPumps Control PCB-90 (075-03035).

SunPumps SCB series pressure pumps are multi-stage centrifugals designed primarily for boosting pressure from surface water as long as the water supply is above or no more than 3' below the level of the pump. They are ideal pumps for home pressure systems, sprinkler systems or inline booster pumps. SunPumps SCB series pressure pumps are very high quality, maintenance-free, DC pumps specifically designed for standalone water delivery in remote locations to be powered from batteries. Allow 2 weeks for delivery.